Error 04/44/Cx : (Autoloader) 04/44/Cx errors: (the x may be any number from 1-9 or any letter A-D)

Resolution :

This error is displayed on the LCD panel of the 240 autoloaders.
The error usually indicates that the autoloader is failing to eject the
magazine.
- SEE IS THERE IS ANY TAPE STUCK IN THE DRIVE
- Power down the system.
- Disconnect the data cable and termination block if external unit.
- Apply power to system/drive. (You can pause the system boot at BIOS
or memory count,
this saves time and there is no need to boot into the OS.)
- Hold in the eject button for 15 seconds as system is powering up.
If the drive ejects the magazine clean the drive 4 times.
- Insert a the magazine into the drive and see if it will eject
normally.
- If the drive fails to eject at this point the drive will need to be
repaired or replaced.

Note: There is no manual extraction procedure for the 240 autoloaders!