Exciting

SETTING SCSI ID ON LTO AUTOLOADERS

SETTING SCSI ID ON LTO AUTOLOADERS :

To change the SCSI ID settings:
1 From the main menu, press the Previous or Next button until Configuration displays in the LCD.
2 Press Enter to select the Configuration menu.
3 Press the Previous or Next button until Change SCSI ID displays in the LCD
4 Press Enter to select the Change SCSI ID option.
5 Press the Previous or Next button until Loader displays in the LCD. To change the SCSI ID of the tape drive, press the Previous or Next button until Drive displays in the LCD.
6 Press Enter to select the Loader option.
7 Press the Previous or Next button until the desired SCSI ID displays.
8 Press the Enter button. Power Cycle for New SCSI ID displays on the LCD screen.
9 Turn off the autoloader. Wait a few seconds, and then turn the autoloader on again. The selected SCSI ID is now set.

HOW TO OBTAIN LICENSE KEY FOR BACKUP EXEC QSE THAT COMES WITH QUANTUM DRIVES

HOW TO OBTAIN LICENSE KEY FOR BACKUP EXEC QSE THAT COMES WITH QUANTUM DRIVES:-

1) Go to ...http://veritas.com/offer
2) Enter 11496 as the reference code
3) Enter the activation code from CD sleeve should be like this eg:- qtm-p1-108-pr110326

LTO3A ISSUES AND CONFIGURATION

LTO3A :

1) 10.10.10.10 / 255.255.0.0
2) JAVA PLUGIN 1.4 AND ABOVE
3) MAIN LOGIN ADMIN - PASSWORD - ADMIN
4) FTP CLIENT - USERNAME - ROOT PASSWORD - PASSWORD

(MAKE SURE THE NETWORK IS CONFIGURED PROPERLY AND THE DRIVE IS COMMUNICATING WITH THE COMPUTER WHERE THE CLIENT IS INSTALLED, CHECK JAVA PLUGIN 1.4 AND ABOVE IS INSTALLED,

MAIN LOGIN WOULD BE ADMIN WITH ADMIN AS PASSWORD,
WHEN YOU CLICK ON FTP CLIENT ON LEFT PANE USERNAME WOULD BE ROOT AND PASSWORD IS PASSWORD)

GETTING GOVAULT LOGS

GETTING GOVAULT LOGS :

FROM DPS ----> Help ----> About Data protection Software ---- > 'Save logs' button
(save the two log files on to your desktop)

CONFIGURING GOVAULT FOR UDMA TRANSFER SPEEDS

CONFIGURING GOVAULT FOR UDMA TRANSFER SPEEDS :

My Computer ---> Properties-----> Device Manager ----> View ----> Devices by Connection

Now Expand Sequentially :
1) ACPI Uniprocessor PC or ACPI Multiprocessor PC
2) Microsoft ACPI-Compliant System
3) PCI Bus
4) Intel(R) XXXXX Ultra ATA Storage Controllers or Intel(R) XXXXX
5) Serial ATA Storage Controllers
6) Primary IDE Channel / Secondary IDE Channel

....If Govault is listed any 1 of the channel then :

Right-click QUANTUM GoVault---->Properties----->Note the indicated Location: value - Then close that window

Then - In the Device Manager window right click the IDE Channel listing under which QUANTUM GoVault is shown ---->Advanced Settings tab -----> To change the transfer mode, select DMA if available from the Transfer Mode list box

UPDATING GOVAULT FIRMWARE

UPDATING GOVAULT FIRMWARE :

My Computer ---> Right Click on the Drive letter -----> Properties ----------> Go to Status tab ----> Update Firmware button on the bottom